Пример
Написать
письмо
Automatisierungs- und Montagetechnik Horbal
DeutschRussianEnglish

Assembly Lines | Heat-Cutters | Stationary screwdriving Systems


Home
Products
Deliveries of the equipment under catalogs from Germany Deliveries of the equipment under catalogs from Germany
Special offers
Contacts
Impressum
Methods of payment and delivery
Products / AMTH-3D-CNC / Modeling / Hobbies / Accessories /
Webdesign

for Next3D series

Order by: orderby Display:

The Clamping claw, suitable for our T-slot plates, made of 5mm thick steel.

In a set of 4 pieces are always the same length exists.

Please select the desired length and whether a screw set is desired.

Price: from 9.90 EUR


The air cooling is essential that consist of plastic in the process of Plexiglas and similar materials.

With connection adapter for Commercial Compressors and throttle valve.

Suitable for Hobby and Next3D series.

Price: from 49.00 EUR


Can be mounted on any machine with 43 mm tool holder.

Very assisting when engraving glas or tiles with a diamond cut mill. The adapter can hold small (maximum 40mm diameter) Proxxon or Dremel engraving spindels.

Price: from 79.00 EUR


Three cable treys, suitable for all Next 3D models.

No more tangled cables!

Easy to install.

Material: Steel, powder-coading optically matches the machine.

Price: from 29.00 EUR


Suction device for Next3D milling. With brush, vacuum cleaner hose and adapter

Hose length 1m

Connecting to a standard vacuum cleaner.

Price: from 79.00 EUR


Two tensioners for support cables. Suitable for all Next3D models.

Easy to install.

Material: Stainless steel

Price: from 16.90 EUR


- Up to 37 functions for WinPC NC and CNC Studio versions.
- Industrial quality.
- pulver coated steel housing.
- Durable, waterproof control.
- Connection to PC via USB port.

Price: from 149.00 EUR


The small CNC pump is driven by a stepper motor which guarantees the highest possible precision in the dosage. The mechanism works with two ball bearings and a silicone hose transport which long life and maintenance-free guaranteed. This pump is used for CNC controlled filling of small amounts of various fluids. It can be used with all fluids that are neutral for silicone materials. The pump can be controlled with a separate control, or with an additional Achsensteueung (4).

Price: from 149.00 EUR


Rotary table for milling and engraving on round surfaces

High-precision workpiece holder by industrial ER40 collets.

The zero point is determined by reference switch. The axis of rotation is normally connected to the existing control electronics instead of an existing axis, but can also be operated with electronic plug-in as a fourth axis.

Price: from 499.00 EUR


Precision Collet ER40

Industrial quality DIN6499B class II

Euro Standard 472E

Smoothness of Rotation: 0.003 - 0.015 mm

Price: from 14.90 EUR


Control Card Stepp 2600

Price: from 99.00 EUR


Dosing feeder point for Next3D and Hobby series

Price: from 49.00 EUR


For clamping two Proxxon milling spindles in all machines with a 43 mm collar.

The distance between the spindles is 120mm.

The upgrade is equipped with a double suction, 1 meter connection hose and an adapter for conventional vacuum cleaner.

Price: from 149.00 EUR


This adapter allows you to equip a Dremel M19x2 your milling machine with a clamping neck of 43mm diameter.

Price: from 17.00 EUR


This appliance pushes the processed plate material on the workbench and sucks in resulting shavings at the same time.

Comes with mounting material, hose and hoover adapter.

Suitable for Next 3D.

Price: from 99.00 EUR


External emergency stop switch with cable.

Cable length 800 mm

Price: from 49.00 EUR


Film drag knife for Next3D and Hobby series

With this tool you can use their machine also for the manufacture of various vinyl cutting.

Model and car lettering, various stickers, milk film for windows, motifs from flock film Iron-on T-shirts, caps, etc.

Price: from 89.00 EUR


This hardware solution allows you in a very simple way, to mill your CNC G-Code files in 3D with your CNC mill.

The G-Code processor links a windows PC / Linux / Mac to a CNC machine with a parallel port. This box also contains - besides a USB and a parallel port - an Arduino microcomputer with GRBL firmware.

Price: from 99.00 EUR


Diameter:

3,174mm

4.0mm

6,0mm

Price: from 14.90 EUR


Shadowless LED illumination for the whole working width of the Next 3D machine.
The lighting is connected to the existing in the NEXT 3D 19V power supply and is switched on together with the machine.

Incl. Mounting hardware and installation instructions.

Price: from 39.00 EUR


LED lighting for Next3D NANO

Options:

- its own power supply

- Connection to the control board

Price: from 29.00 EUR


- Kühlen Sie ab sofort werkzeugschonend und durch den Einsatz einer speziellen Kühlflüssigkeit und sogar völlig ROSTFREI!!
- Stabile, pulverbeschichtete Stahlkonstruktion mit eingelassene T-Nuten Platte aus eloxiertem Aluminium mit einer großartigen Spannfläche von 335 x405 mm.
- Sehr leiser Betrieb durch eine eingebaute Silent- Pumpe
- Nach Fertigstellung Ihres Werkstückes kann die Flüssigkeit mit der eingebauten Pumpe bequem abgesaugt und eingelagert werden

Price: from 219.00 EUR


Micro Air Vacuum Pump / Compressor

Price: from 149.00 EUR


Specifications:

Rated input Power - 1.050 Watts

Idle Speed - 10.000 – 29.000 1/min.

Collet - 8 mm

Clamping collar-Ø - 43 mm

Price: from 199.99 EUR


Specifications:

Rated input Power - 1.050 Watts

Idle Speed - 5.000 – 25.000 1/min.

Collet - 8 mm

Clamping collar-Ø - 43 mm

Price: from 199.99 EUR


Specifications:

Rated input Power - 530 Watts

Idle Speed - 29.000 1/min.

Collet - 8 mm

Clamping collar-Ø - 43 mm

Price: from 169.60 EUR


Specifications:

Rated input Power - 800 Watts

Idle Speed - 10.000 – 29.000 1/min.

Collet - 8 mm

Clamping collar-Ø - 43 mm

Price: from 179.00 EUR


Specifications:

Rated input Power - 800 Watts

Idle Speed - 10.000 – 29.000 1/min.

Collet - 8 mm

Clamping collar-Ø - 43 mm

Price: from 199.00 EUR


Mini Tool length Sensor

Price: from 49.00 EUR


The sensor has a switching path of about 1mm. After that you can press down the probe nor a 1mm (Safety way at excessive ramp), is damaged without the switch.

Overall diameter: 30mm

Overall height: 18,5mm/p

Price: from 59.00 EUR


- This module may, for example, an axis of rotation, or the like can be controlled
- Easily switch in CNC Studio (Y to the rotational axis or X on the axis of rotation)
- Simply connect it to the control board and screw it
- Adjustable phase current for motors 2,5A - 2A - 1,5A - 1A

Price: from 59.00 EUR


One pair (2 pieces) tensioners to apply Plate material on a T- groove panel.

Maximum plate thickness: 10 mm

Price: from 22.90 EUR


Plotterpin for Next3D and Hobby series

Price: from 39.00 EUR


Precision Grease

Weight: 40 grams or 125 grams

Price: from 2.49 EUR


Precision oil

Volume:

5ml.

125ml.

Price: from 2.99 EUR


Precision tailstock suitable for CNC axis of rotation

Small, strong, stable and very precise.
Due to the 30 mm thick tip can also easily tubing up to 30 mm internal diameter may be clamped.

Price: from 89.00 EUR


This adapter allows you to convert a Proxxon milling machine with a clamping neck diameter of 20mm to your milling machine with a clamping neck diameter of 43mm.

Price: from 17.00 EUR


Rotary knob to manually process the axes.

Aluminum, hard anodized.

Price: from 7.90 EUR


Suction apparatus for Next3D NANO

Price: from 49.00 EUR


All parts you need to upgrade your Next3D CNC with a T-slot aluminum table.

- Extra developed for Next3D series, passed T-groove profile of anodized aluminum and cut to size.

- New front panel with cut outs, that you can insert from the front the turnbuckles.

Price: from 99.00 EUR


Toolholder for 5 Tools with 43mm recording.

Perfect for any neat work.

Made of 1,5 mm thick stainless steel.

Price: from 29.00 EUR


Vacuum table for Next 3D and Next 3D Nano.

With adjustable suction area. Suction area can be defined by laying the silicone sealment. Made out of massive, 12 mm thick aluminium. Suction ensues through two pneumatic connections for 6mm hose.

The vacuum table can be mounted on a T- groove panel.

Price: from 139.00 EUR



Home . Products . Deliveries of the equipment under catalogs from Germany . Special offer . Contacts