|
|
The Clamping claw, suitable for our T-slot plates, made of 5mm thick steel.
In a set of 4 pieces are always the same length exists.
Please select the desired length and whether a screw set is desired. Price: from 9.90 EUR
|
|
|
|
|
The air cooling is essential that consist of plastic in the process of Plexiglas and similar materials.
With connection adapter for Commercial Compressors and throttle valve.
Suitable for Hobby and Next3D series. Price: from 49.00 EUR
|
|
|
|
|
Can be mounted on any machine with 43 mm tool holder.
Very assisting when engraving glas or tiles with a diamond cut mill. The adapter can hold small (maximum 40mm diameter) Proxxon or Dremel engraving spindels. Price: from 79.00 EUR
|
|
|
|
|
Three cable treys, suitable for all Next 3D models.
No more tangled cables!
Easy to install.
Material: Steel, powder-coading optically matches the machine. Price: from 29.00 EUR
|
|
|
|
|
Suction device for Next3D milling. With brush, vacuum cleaner hose and adapter
Hose length 1m
Connecting to a standard vacuum cleaner. Price: from 79.00 EUR
|
|
|
|
|
Two tensioners for support cables. Suitable for all Next3D models.
Easy to install.
Material: Stainless steel Price: from 16.90 EUR
|
|
|
|
|
- Up to 37 functions for WinPC NC and CNC Studio versions.
- Industrial quality.
- pulver coated steel housing.
- Durable, waterproof control.
- Connection to PC via USB port. Price: from 149.00 EUR
|
|
|
|
|
The small CNC pump is driven by a stepper motor which guarantees the highest possible precision in the dosage. The mechanism works with two ball bearings and a silicone hose transport which long life and maintenance-free guaranteed. This pump is used for CNC controlled filling of small amounts of various fluids. It can be used with all fluids that are neutral for silicone materials. The pump can be controlled with a separate control, or with an additional Achsensteueung (4). Price: from 149.00 EUR
|
|
|
|
|
Rotary table for milling and engraving on round surfaces
High-precision workpiece holder by industrial ER40 collets.
The zero point is determined by reference switch. The axis of rotation is normally connected to the existing control electronics instead of an existing axis, but can also be operated with electronic plug-in as a fourth axis. Price: from 499.00 EUR
|
|
|
|
|
Precision Collet ER40
Industrial quality DIN6499B class II
Euro Standard 472E
Smoothness of Rotation: 0.003 - 0.015 mm Price: from 14.90 EUR
|
|
|
|
|
Control Card Stepp 2600 Price: from 99.00 EUR
|
|
|
|
|
Dosing feeder point for Next3D and Hobby series Price: from 49.00 EUR
|
|
|
|
|
For clamping two Proxxon milling spindles in all machines with a 43 mm collar.
The distance between the spindles is 120mm.
The upgrade is equipped with a double suction, 1 meter connection hose and an adapter for conventional vacuum cleaner.
Price: from 149.00 EUR
|
|
|
|
|
This adapter allows you to equip a Dremel M19x2 your milling machine with a clamping neck of 43mm diameter. Price: from 17.00 EUR
|
|
|
|
|
This appliance pushes the processed plate material on the workbench and sucks in resulting shavings at the same time.
Comes with mounting material, hose and hoover adapter.
Suitable for Next 3D. Price: from 99.00 EUR
|
|
|
|
|
External emergency stop switch with cable.
Cable length 800 mm Price: from 49.00 EUR
|
|
|
|
|
Film drag knife for Next3D and Hobby series
With this tool you can use their machine also for the manufacture of various vinyl cutting.
Model and car lettering, various stickers, milk film for windows, motifs from flock film Iron-on T-shirts, caps, etc. Price: from 89.00 EUR
|
|
|
|
|
This hardware solution allows you in a very simple way, to mill your CNC G-Code files in 3D with your CNC mill.
The G-Code processor links a windows PC / Linux / Mac to a CNC machine with a parallel port. This box also contains - besides a USB and a parallel port - an Arduino microcomputer with GRBL firmware. Price: from 99.00 EUR
|
|
|
|
|
Diameter:
3,174mm
4.0mm
6,0mm Price: from 14.90 EUR
|
|
|
|
|
Shadowless LED illumination for the whole working width of the Next 3D machine.
The lighting is connected to the existing in the NEXT 3D 19V power supply and is switched on together with the machine.
Incl. Mounting hardware and installation instructions. Price: from 39.00 EUR
|
|
|
|
|
LED lighting for Next3D NANO
Options:
- its own power supply
- Connection to the control board Price: from 29.00 EUR
|
|
|
|
|
- Kühlen Sie ab sofort werkzeugschonend und durch den Einsatz einer speziellen Kühlflüssigkeit und sogar völlig ROSTFREI!!
- Stabile, pulverbeschichtete Stahlkonstruktion mit eingelassene T-Nuten Platte aus eloxiertem Aluminium mit einer großartigen Spannfläche von 335 x405 mm.
- Sehr leiser Betrieb durch eine eingebaute Silent- Pumpe
- Nach Fertigstellung Ihres Werkstückes kann die Flüssigkeit mit der eingebauten Pumpe bequem abgesaugt und eingelagert werden
Price: from 219.00 EUR
|
|
|
|
|
Micro Air Vacuum Pump / Compressor Price: from 149.00 EUR
|
|
|
|
|
Specifications:
Rated input Power - 1.050 Watts
Idle Speed - 10.000 – 29.000 1/min.
Collet - 8 mm
Clamping collar-Ø - 43 mm Price: from 199.99 EUR
|
|
|
|
|
Specifications:
Rated input Power - 1.050 Watts
Idle Speed - 5.000 – 25.000 1/min.
Collet - 8 mm
Clamping collar-Ø - 43 mm Price: from 199.99 EUR
|
|
|
|
|
Specifications:
Rated input Power - 530 Watts
Idle Speed - 29.000 1/min.
Collet - 8 mm
Clamping collar-Ø - 43 mm Price: from 169.60 EUR
|
|
|
|
|
Specifications:
Rated input Power - 800 Watts
Idle Speed - 10.000 – 29.000 1/min.
Collet - 8 mm
Clamping collar-Ø - 43 mm Price: from 179.00 EUR
|
|
|
|
|
Specifications:
Rated input Power - 800 Watts
Idle Speed - 10.000 – 29.000 1/min.
Collet - 8 mm
Clamping collar-Ø - 43 mm Price: from 199.00 EUR
|
|
|
|
|
Mini Tool length Sensor Price: from 49.00 EUR
|
|
|
|
|
The sensor has a switching path of about 1mm. After that you can press down the probe nor a 1mm (Safety way at excessive ramp), is damaged without the switch.
Overall diameter: 30mm
Overall height: 18,5mm/pPrice: from 59.00 EUR
|
|
|
|
|
- This module may, for example, an axis of rotation, or the like can be controlled
- Easily switch in CNC Studio (Y to the rotational axis or X on the axis of rotation)
- Simply connect it to the control board and screw it
- Adjustable phase current for motors 2,5A - 2A - 1,5A - 1A Price: from 59.00 EUR
|
|
|
|
|
One pair (2 pieces) tensioners to apply Plate material on a T- groove panel.
Maximum plate thickness: 10 mm Price: from 22.90 EUR
|
|
|
|
|
Plotterpin for Next3D and Hobby series Price: from 39.00 EUR
|
|
|
|
|
Precision Grease
Weight: 40 grams or 125 grams Price: from 2.49 EUR
|
|
|
|
|
Precision oil
Volume:
5ml.
125ml. Price: from 2.99 EUR
|
|
|
|
|
Precision tailstock suitable for CNC axis of rotation
Small, strong, stable and very precise.
Due to the 30 mm thick tip can also easily tubing up to 30 mm internal diameter may be clamped. Price: from 89.00 EUR
|
|
|
|
|
This adapter allows you to convert a Proxxon milling machine with a clamping neck diameter of 20mm to your milling machine with a clamping neck diameter of 43mm. Price: from 17.00 EUR
|
|
|
|
|
Rotary knob to manually process the axes.
Aluminum, hard anodized. Price: from 7.90 EUR
|
|
|
|
|
Suction apparatus for Next3D NANO Price: from 49.00 EUR
|
|
|
|
|
All parts you need to upgrade your Next3D CNC with a T-slot aluminum table.
- Extra developed for Next3D series, passed T-groove profile of anodized aluminum and cut to size.
- New front panel with cut outs, that you can insert from the front the turnbuckles. Price: from 99.00 EUR
|
|
|
|
|
Toolholder for 5 Tools with 43mm recording.
Perfect for any neat work.
Made of 1,5 mm thick stainless steel. Price: from 29.00 EUR
|
|
|
|
|
Vacuum table for Next 3D and Next 3D Nano.
With adjustable suction area. Suction area can be defined by laying the silicone sealment. Made out of massive, 12 mm thick aluminium. Suction ensues through two pneumatic connections for 6mm hose.
The vacuum table can be mounted on a T- groove panel. Price: from 139.00 EUR
|
|
|
