Model 6292C Servo Drive
Axial Lead Inserter Features
- High-performance insertion machine with insertion rates up to 40,000 components per hour with both heads, and insertion PPM of 150 or better
- Insertion span capabilities from 5mm (0.197") to 22.43mm (0.883") with standard tape input, depending on tooling selected
- VME-based control system with embedded P.C.
- IM-Universal Platform Software with graphical user interface
- Servo motor driven insertion heads, clinches, insertion span axes, and X-T table axes
- Uninterruptable Power Supply (UPS) included with each machine
- Scrap Tape Removers included with each machine
Model 6298C Servo Drive
Board Handling System Configurations
Same features as VCD DH 8, Model 6292C, plus...
- Internal Board Handling System (BHS)
- Auto MisMark and Bad Board Reject Station
- Loader/Unloader: Magazine-to-Magazine, CE-compliant with Long Buffers only
- Loader/Unloader: Vacuum Bare Board-to-Magazine, not CE-compliant
- Loader/Unloader: Destacker on 29", 44", or 58" Conveyor-to-Magazine, CE-
compliant with 44" or 58" Conveyor and Long Buffers only
Functional Description
Models 6292C and 6298C automatically insert axial leaded components from dual, sequenced taped input packages into printed circuit boards (PC boards). A product (pattern program) is created with information pertaining to the components, PC boards, and processing requirements. When this product is loaded, machine operation can be started.
When the machine is started, the PC boards can be located and clamped into the workboard holders. The product activates the X-Y positioning system and the component feed. The component feed transfers taped components to the insertion heads. The insertion tooling cuts the component leads from the carrier tape to the required length determined by the product, and forms the components for insertion.
After insertion through the PC board, the component leads are cut and formed (clinched) to mechanically secure them to the board. The process continues until the product is completed and all required axial components are in place. When the product is complete, the PC board can be removed from the machine.
