Off Cut Remover Hektor 2 (Code: )

The Hektor 2, as the SEP3, is designed to separate milled PCBs carefully and fast. The off-cut material is removed smoothly and precisely.
The matrix consists of two parts, this ensures easy and cost saving change of the blades.

Compressed air is used for the separation process.
The operating pressure can be set on the machine. When the foot switch is pressed, the off-cut is punched out. The cut-offs are collected in the collecting box. When the gate is opened the waste material can be extracted.

Safe operation with Off-Cut Remover Hektor 2

The PCB is slipped with its milled groove over the blade and is placed onto the matrix. The off-cut is pulled under the blade. When the foot switch is pressed, the off-cut is punched out and the waste material is collected inside the machine.
T-Blade
With the T-blade off-cuts can be punched out right and left of the blade without turning the PCB.
L-Blade
The L-blade will be used if there are small distances between the off-cuts
Matrix
Included in delivery.