WR 2002 Set Repair station (Code: )

Technical data

This station is ESD safe.
Simultaneous operation of hot air and desoldering iron is not possible!
Dimension L x B x H: 273 x 235 x 102 mm (10,75 x 9,2 x 4,02 inch)
Weight: approx. 6,7 kg
Channels: 2
Net supply: 230 V
Power supply: 250 W
Protection class: I
Fuse: T500 mA (230 V / 50/60 Hz)
Fuse overcurrent release: 1,6 A

Temperature control of channels:
- Soldering and desoldering tool, continuously variable from 50°C - 550°C (150°F - 999°F)
- Temperature control range is tool independent
- Soldering iron WP 80 / WP 120: 50°C - 450°C (150°F - 850°F)
- Soldering iron WP 200 / WSP 150: 50°C - 550°C (150°F - 950°F)
- Desoldering iron DSX 80 / DXV 80 / DSX 120: 50°C - 450°C (150°F - 850°F)
- Hot air iron HAP 1: 50°C - 550°C (150°F - 950°C)

Temperature accuracy: ± 9°C (± 17°F)
Temperature stability: ± 2°C (± 4°F)
Bleeder: Soldering tip (Tip to ground) conforms IPC-J-001
Bleeder voltage: Soldering tip (Tip to ground) conforms IPC-J-001
Pump: (periodic duty 30/30s)
Max. vacuum: 0,7 bar
Max. delivery rate: max. 10 l/min
Hot air: max. 15 l/min
Display: LCD
Temperature control: Buttons
Equipotentional bonding: Via 3.5 mm pawl socket at the back of device (hard grounded normal state)
USB interface: no

Rework - Soldering, Desoldering and Hot air
- One station meets the requirements of a rework workplace
- Unique connecting compatibility of all tools
- 3 respectively 2 independend tool channels with automatic tool recognition guarantee the simultanuous operation of 2 to 3 soldering tools.
- Tools are permanentely ready for use